Apple/Mac Epson DHCP config

  1. Hardwire the printer directly into the Apple computer by using an ethernet cable.
  2. Click Wifi Icon on the top tray then select "Open Network Preferences"
  3. Turn wifi off and select Ethernet as the connection mode  
  4. Click IPv4 and select Manually from drop down 
  5. Enter and apply IP Address: 192.168.192.1 (not 192.168.192.100) Subnet: 255.255.255.0 Router IP address: 192.168.192.168
  6. Obtain another test slip and verify that the IP Address is still the same.
  7. Open browser and navigate to 192.168.192.168
  8. After Epson UI loads click TCP/IP under the configuration section 
  9. Under settings set Automatic for Get IP address and Set using PING disabled 
  10. Click submit and then click reset.
  11. Wait for printer to reset and confirm changes by printing test slip.